Click on the options below and start designing your dream banjo! Order now and have your banjo finished in Fall 2020!

You will be able to choose your scale length and fretboard material further down. All frets are standard nickel silver and made specifically for banjos. Faux frets are simply inlayed walnut veneer inside the fret slots which is sanded flush to the fingerboard. It makes playing banjo without frets a little easier. All half fretless banjos come with a brass plate up to the 7th fret.

Scale length is calculated by measuring the distance from the front edge of the nut, where it butts against the end of the fingerboard, to the center of the 12th (octave) fret, then doubling that measurement.

Persimmon is in the Ebony family and is a very hard and durable material. It will patina and turn darker with use and age. Richlite is a Recycled Paper and resin product that resembles Black Ebony almost identically. Richlite is also water proof and has been proven and tested as a fingerboard material for decades.

We recommend you choose your wood based on aesthetics. While there are tonal differences between the wood options, they are subtle. Click Here to find out more about the differences. Curly Maple availability will vary depending on supply.

Quilted star inlay only available at this time.

The S-Scoop allows for more room for your thumb while playing clawhammer. 17 frets for standard and short scale scooped necks and 15 frets for A-scales. Fully fretted standard and short scales have 22 frets. Fully fretted A-scale necks have 19 frets.

Both of these heel choices are very traditional. Choose based on your personal preference. Please note if you choose the vintage heel, the heel cap will match your fingerboard choice.

Different head material affect tone greatly. Click Here for more information.

11" rims produce a brighter more focused tone. 12" have a full, open tone with more mellowness. Tone will very greatly depending on head material and tone ring.

Metal rims can only come with or without a Dobson tone ring. The brass and copper options will come aged. The metal clad rims are heavier than the wood rims and reflect and project tone more than the wood rims. All metal clad rims come with stained black wood inside rim material.

Tone rings affect sound, volume and tone. Learn more about the difference between each tone ring option

Raw brass will age over time. Nickel hardware is clean and traditional, but needs to be wiped down with a clean rag at the end of each use to keep it looking shiny and new. Aged brass is the “no maintenance” option and looks 100 years new right out of the box.

All cases come with a lifetime warranty. The access stage one cases have nice thick padding and are the best soft cases on the market that won't break the bank. Only the Access stage one cases come with PBCO logo.

These armrests give a traditional look while making it more comfortable to play.

For a simple look, choose the minimalist tailpiece. The Pisgah Hawktail was designed by us in order to create more downward pressure on the bridge and head, making the banjo more responsive and enhancing the tone.

The standard maple bridge has Ebony top. The Mulheron bridge is made out of walnut with a persimmon tip and has a continuous leg and won't "sag" over time. Because of this, it also eliminates overtones and produces a mellow clear tone.

Choose between metal strings and gut strings. The PBCO clawhammer banjo metal strings are specifically designed for most clawhammer players. Gut strings produce a plunky and mellow tone, and are low in volume. They are traditionally used in minstrel-style playing.

The Banjo Tweaker comes with a 5/16" deep well socket perfect for adjusting bracket nuts. The tool also has a flat head screw driver to remove dowel stick hardware if taking banjo apart. It also has a phillips head screw driver for anything not banjo related. Don't leave home without it!

Review your selections before submitting your $250 deposit on next page. Changes can still be made after deposit is submitted as long as we are not too far along in construction. If undecided options are chosen, we will be in touch to help you finalize your decision. Custom banjo orders are built in batches and can take 4-6 months to complete based on order date.

• Base Price: ${:212}
• Frets: {:89}
• Scale: {:22}
• Fingerboard: {:44}
• Wood: {:27}
• Headstock: {:183} {:203}
• Scoop: {:190}
• Heel: {:198}
• Head: {:36}
• Rim Size: {:46}
• Rim Material: {:160}
• Tone Ring: {:34} {:161}
• Hardware: {:50}
• Case: {:51} {:204} {:205}
• Arm Rest: {:52}
• Tailpiece: {:217}
• Bridge Wood: {:53}
• Strings: {:54}
• Banjo Tools: {:207}

A $250 balance is due in order to get the ball rolling on your custom banjo, with the remaining balance due upon completion. Once the banjo is finished, we will send you pictures and your final invoice with shipping charges. You can also choose to pick up your banjo in person and meet your makers! Shipping is usually $45-$60 in the contiguous US and Canada, and $100-$200 internationally. Let’s get started!

NOTE: In order to complete your order a deposit of $250 is required.